header photo

All Line Cards

Aluminum Sheets 5052 H32
AMS QQ-Q 250/8, ASTM B209 and AMS 4027
Paper interleaved. PVC protective coating available one or two sides
Non Pattern Lengths Also Available. Other gages and widths available upon request.
Gage Width 96" Length 120" Length Coil Lbs. Per Sq. Ft
0.020 48 ● ● 0.28
0.025 48 ● ● 0.35
0.032 48 ● ● 0.45
0.040 48 ● ● 0.56
0.050 48 ● ● 0.70
0.063 48 ● ● 0.88
0.063 60 ● ● 0.88
0.063 72 ● ● 0.88
0.080 48 ● ● 1.12
0.080 60 ● ● 1.12
0.080 72 ● ● 1.12
0.090 48 ● ● 1.26
0.090 60 ● ● 1.26
0.090 72 ● ● 1.26
0.100 48 ● ● 1.40
0.100 60 ● ● 1.40
0.125 48 ● ● 1.75
0.125 60 ● ● 1.75
0.125 72 ● ● 1.75
0.190 48 ● ● 2.66
0.190 60 ● ● 2.66
0.250 48 ● ● 3.49
0.250 60 ●  ● 3.49
0.375 48 144 5.24
0.500 48 144 6.98

Aluminum Sheets 5052 H38
AMS QQ-Q 250/8, ASTM B209 and AMS 4027
Paper interleaved. PVC protective coating available one or two sides
Non Pattern Lengths Also Available. Other gages and widths available upon request.
Gage Width 96" Length 120" Length Coil Lbs Per Sq. Ft

.040

 48 ● ● 0.56
.063 30,36,48 ● ● 0.88
.080 24,30,36,48,60 ● ● 1.12
.100 30,36,48,60 ● ● 1.40
.125 30,36,48,60 ● ● 1.75

 

Aluminum Sheets 3003 H14
AMS QQ-Q 250/11, ASTM B209 and AMS 4027
Paper interleaved. PVC protective coating available one or two sides
Non Pattern Lengths Also Available. Other gages and widths available upon request.
Gauge Width 96" Length 120" Length 144" Length Coil Lbs. Per Sq. Ft
0.032 48 ● ● 0.46
0.040 48 ● ● 0.71
0.050 48 ● ● 0.71
0.063 48 ● ● 0.90
 0.063 60 ● 0.90
0.080 48 ● 1.141
0.090 48 ● ● 1.29
0.125 48 ● ● ● 1.78
0.125 60 ● ● 1.78
0.190 48 ● ● 2.71
0.190 60 ● ● ● 2.71
0.190 72 ● 2.71
Tread Bright Aluminum Sheets 3003 H22
ASTM B209
Paper interleaveing available
Non Pattern Lengths Also Available. Other gages and widths available upon request.
Gage Width 120" Length 144" Length Coil Lbs. Per Sq. Ft
0.063 48 ● ● 1.02
0.080 48 ● ● 1.21
0.080 60 ● ● 1.21
0.100 48 ● ● 1.57
0.100 60 ● ● 1.57
0.125 48 ● ● 1.92
0.125 60 ● ● 1.92
0.190 48 ● ● 2.82
0.190 60 ● ● 2.82
0.250 48 ● 3.7
Aluminum Sheets 6061 T6/T6511
AMS QQ-Q 250/11, ASTM B209 and AMS 4027
Paper interleaved. PVC protective coating available one side
Non Pattern Lengths Also Available. Other gages and widths available upon request.
Gage Width 96" Length 120" Length 144" Length Coil Lbs. Per Sq. Ft
0.040 48  ● ● 0.56
0.063 48  ● ● ● ● 0.89
0.080 48 ● ● 1.13
0.100 48 ● ● 1.41
0.125 48 ● ● 1.76
0.190 48 ● 2.68
0.250 48.5 144.5 3.53
0.375 48.5 144.5 5.29
0.500 48.5 144.5 7.06
Steel Sheet - CR
ASTM A1008 CS Type B (Commercial Quality Steel)
Cold Rolled and Annealed, Cut Edge
Non Pattern Lengths Also Available.
Gage Nominal Thickness Width 96" Length 120" Length Coil Lbs. Per Sq Ft.
24 0.0200 48 ● 1.000
22 0.0300 48 ● ● 1.250
20 0.0400 4 ● ● ● 1.500
20 0.0400 60 ● ● 1.500
19 0.0400 48 ● ● 1.750
18 0.0500 36 ● ● 2.000
18 0.0500 48 ● ● ● 2.000
18 0.0500 60 ● ● 2.000
18 0.0500 72 ● ● 2.000
16 0.0600 36 ● ● 2.500
16 0.0600 48 ● ● ● 2.500
16 0.0600 60 ● ● 2.500
16 0.0600 72 ● ● 2.500
14 0.0700 36 ● ● 3.125
14 0.0700 48 ● ● ● 3.125
14 0.0700 60 ● ● 3.125
14 0.0700 72 ● ● 3.125
13 0.0900 48 ● ● 3.750
12 0.1000 36 ● ● ● 4.375
12 0.1000 48 ● ● 4.375
12 0.1000 60 ● ● 4.375
12 0.1000 72 ● ● 4.375
11 0.1200 48 ● ● ● 5.000
11 0.1200 60 ● ● 5.000
10 0.1300 48 ● ● 5.625
Steel Sheet - HRPO
ASTM A1011 CS Type B (Commercial Quality Steel)
Low Carbon Commercial Steel, Pickeled, Oiled Milledge
Non Pattern Lengths Also Available. Other gages and widths available upon request.
Gage Width 96" Length 120" Length Coil Lbs. Per Sq Ft.
16 48 ● ● 2.500
14 36 ● ● 3.125
14 48 ● ● ● 3.125
14 60 ● ● 3.125
14 72 ● ●

3.125
13 48 ● ● 3.750
12 36 ● ● ● 4.375
12 48 ● ● 4.375
12 60 ● ● 4.375
12 72 ● ● 4.375
11 48 ● ● ● 5.000
11 60 ● ● 5.000
10 36 ● 5.625
10 48 ● ● 5.625
10 60 ● ● 5.625
10 72 ● ● 5.625
8 48 ● ● ● 6.88
7 60 ● ● ● 7.5
0.1875 48 ● ● 7.651
0.2500 48 ● ● 10.21
0.2500 60 ● ● 10.21
0.3750 48 ● ● 15.32
0.5000 48 ● 20.42

Steel Sheet - Galvanized
ASTM A653 CS Type B
630, 40, 60, 90 Available
Chem Treat Dry - no oil ROHS - available on same sizes
Non Pattern Lengths Also Available. Other gages, widths and coatings available upon request.
Gage Width 96" Length 120" Length Coil Lbs. Per Sq Ft. G90 Coating G40 Coating
28 48 ● ● 0.780 ●
26 36 ● 0.907 ● ●
48 ● ● 0.907 ● ●
24 48 ● ● ● 1.156 ● ●
60 ● ● 1.156 ●
22 48 ● ● 1.406 ●
60 ● ● 1.406 ●
20 36 ● 1.656 ●
48 ● ● ● 1.656 ●
60 ● ● 1.656 ●
18 48 ● ● ● 2.156 ●
60 ● ● ● 2.156 ●
16 36 ● ● 2.656 ●
48 ● ● ● 2.656 ●
60 ● ● 2.656 ●
14 36 ● 3.281 ●
48 ● ● 3.281 ●
60 ● 3.281 ●
12 36 ● 4.531 ●
48 ● ● 4.531 ●
60 ● ● 4.531 ●
11 48 ● ● 5.156 ●
60 ● 5.156 ●
10 36 ● 5.781 ●
48 ● 5.781 ●
Sheet Steel - Galvannealed
ASTM A653 CS Type B
Chem Treat Dry - no oil
Non Pattern Lengths Also Available. Other gages, widths and coatings available upon request.
Gage Size in Inches Width Length 120" Coil Lbs. Per Sq Ft. A40 Coating A60 Coating
22 0.0300 48 ● ● 1.41 ●
20 0.0400 48 ● ● 1.66 ● ●
0.0400 60 ● ● 1.66 ● ●
18 0.0500 48 ● ● 2.16 ● ●
0.0500 60 ● ● 2.16 ● ●
16 0.0600 48 ● ● 2.66 ● ●
0.0600 60 ● ● 2.66 ● ●
14 0.0800 48 ● ● 3.28 ● ●
0.0800 60 ● ● 3.28 ● ●
12 0.1100 48 ● ● 4.53 ● ●
0.1100 60 ● ● 4.53 ● ●
11 0.1200 60 ● ● 5.16 ● ●
0.1200 60 ● ● 5.16 ● ●
10 0.1400 48 ● ● 5.78 ● ●
0.1400 60 ● ● 5.78 ● ●

Stainless Steel Sheet Type 304
2B Finish and #3 or 4 Finishes available
ASTM A240
Cold Rolled, Annealed. Non-Magnetic
2B provided paper interleaved. PVC protective coating available one or two sides
Non Pattern Lengths Also Available. Other gages and widths available upon request.
Gage Size in Inches Width 96" Length 120" Length Coil Lbs. Per Sq Ft. 2B #4
24 0.024 36 1.008
48 ● 1.008
22 0.030 36 1.260
48 ● ● 1.260
20 0.036 36 1.512
48 ● ● 1.512
19 0.042 48  1.764
18 0.048 36 2.016
48 ● ● 2.016
60 ● ● 2.016
16 0.060 36 2.520
48  ● ● 2.520
60 ● 2.520
14 0.075 36  3.150
48 ● ● 3.150
60 ● 3.150
13 0.090 48  3.780
12 0.105 36  4.410
48 ● ● 4.410
60 ● 4.410
11 0.120 48 ● ● 5.040
60 ● 5.040
10 0.135 48 ● ● 5.670
60 ● 5.670
7 0.187 48 ● 7.871
60 7.871
HRAP
0.19 0.187 48 ● 8.579
0.25 0.25 48 ● 11.160

Copper
ASTM B152, Alloy 110, 1/4 to 1/2 hard
Paper interleaved or PVC protective coating available one side
Non Pattern Lengths Also Available. Other gages and widths available upon request.
Gage Width 96" Length 120" Length Coil Lbs. Per Sq. Ft
0.063 36 ● ● 2.9
0.094 36 ● ● 4.35
0.125 36 ● ● 5.8
0.188 36 ● ● 8.69
0.250 36 ● ● 11.59
Sheet Steel - Aluminized
ASTM A463 CS Type 1
Light Oil
Non Pattern Lengths Also Available. Other gages and widths available upon request.
Gage Size in Inches Width 120" Length Coil Lbs. Per Sq Ft. T1-40 Coating
20 0.04 48 ● ● 1.61 ●
18 0.05 48 ● ● 2.11 ●
16 0.06 48 ● ● 2.61 ●
14 0.08 48 ● ● 3.24 ●
12 0.11 48 ● ● 4.49 ●

Reasons to do Business With Us!

  1. Wide Variety of Inventory
  2. Modern Processing Equipment
  3. Short Lead Times
  4. QMI is Your Partner
  5. ISO 9001:2008
  6. Over 60 Years Experience
  7. We are NOT Your Competitor

Product Line Cards

Know The Source

QMI is a full service distributor of flat-rolled products since 1941.  QMI stocks a large inventory of multiple alloys to meet the short lead times of our customers.

Supplier or Competitor?